top of page

Packer Gas Vent Valves

Operators must be confident in reliability of these mission critical components. Tejas designs and tests these chemical injection systems to the most stringent standards. 

 

Let us help you getting peace of mind. Succeed with us!

image-prod-pgv-deep-set-valves.png

Deep Set Valves

The Camco* PGV-DS sleeve-closure type gas vent valve controls the flow of annular vent gas in electrical submersible pump installations and injection gas in low volume gas lift installations. Commonly attached to the top of a multi-bore packer, the valve vents gas from below the packer to the annulus above when actuated from surface. The PGV-DS is normally installed with a dedicated hydraulic control line for positive surface control, but may also be installed using a common control line with the Tubing Retrievable Surface Controlled Subsurface Safety Valve (SCSSV). 

PGV Deep Set Technical Sheet

The Camco* PGV-S-HF sleeve-closure type, high flow gas vent safety valve isolates annular flow below the packer. The PGV-S-HF designed to control the flow of annular vent gas in electrical submersible pump installations, and injection gas in low volume gas lift installations.

image-prod-pgv-high-flow-valves.png

High Flow Valves

PGV High Flow Valves Technical Sheet

image-prod-pgv-sleeve-valves.png

Sleeve Valves

The Camco* PGV-S sleeve-closure type gas vent safety valve that isolates annular flow below the packer. The PGV-S designed to control the flow of annular vent gas in electrical submersible pump installations, and injection gas in low volume gas lift installations. The PGV-S valve is also commonly attached to the top of multi-bore packer. The packer usually blocks annular flow, provides a path for produced fluids, ESP power cable access, and a vent path for separated gas and/or break-out gas in ESP applications. The PGV-S is normally installed with a dedicated hydraulic control line for positive surface control of the gas vent safety valve, but may also be installed using a common control line with the tubing safety system. The PGV-S is rated to 5,000-psi [34,474 kPa] working pressure.

 

The PGV-S valve design features an innovative sleeve-closure system. The proven rod-piston hydraulic actuation system provides predictable operation, decreased friction, a reduced hydraulic chamber area, and deeper setting depths than valves with concentric operating pistons.

PGV Sleeve Valves Technical Sheet

bottom of page